Denon Receivers AVR-590 Manual

The Denon AVR-590 is a versatile 7.1 channel AV receiver that delivers high-quality audio and video performance. It supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, and features multiple HDMI inputs for connecting various devices. The AVR-590 also includes advanced features such as Audyssey MultEQ for room calibration, a user-friendly interface, and support for 4K video pass-through. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 7.1 channel audio, multiple HDMI inputs, Audyssey MultEQ, remote control, and various audio format support.

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

1. Connect speakers: Use the speaker terminals for connecting your speakers.
2. Connect video sources: Use HDMI inputs for video devices.
3. Plug into AC power.
4. Connect to TV: Use HDMI output to connect to your television.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts to configure settings.

1. Set speaker configuration: Use the setup menu to configure your speaker layout.
2. Run Audyssey MultEQ: Follow the instructions to calibrate your room acoustics.
3. Connect to network: Set up Wi-Fi or Ethernet connection for streaming services.
4. Update firmware: Check for any available updates for optimal performance.

CAUTION! Ensure stable surface; avoid placing other devices on top of the receiver.

Specifications

• Channels: 7.1 channel.
• Power Output: 90 watts per channel (8 ohms).
• Audio Formats: Dolby TrueHD, DTS-HD Master Audio, PCM.
• Video Formats: Supports 4K video pass-through.
• HDMI Inputs: 6 HDMI inputs.
• Zone 2 Output: Yes, for multi-room audio.
• Dimensions: 17.1 x 13.4 x 6.3 inches.
• Weight: 20.5 lbs.

Controls and Settings

Access settings via the on-screen display or front panel controls. Key controls include power, volume, input selection, and menu navigation.

Remote: Power, volume, input selection, and setup menu access.

Audio settings: Adjust bass, treble, and balance. Video settings: Adjust brightness, contrast, and color.

Connecting Devices

Connect devices using HDMI, optical, or analog inputs. Ensure the receiver is powered off before making connections.

1. Turn off the receiver and devices before connecting.
2. Match cables to ports (e.g., HDMI to HDMI).
3. Select input via the remote control or front panel.

Tip: Label cables for easier identification.

Playing Audio/Video Media

Supports various audio and video formats.

1. Select input: Use the remote to select the desired input source.
2. Play media: Use the connected device to start playback.
3. Adjust volume: Use the volume control on the remote or front panel.
4. Access streaming services: Use the built-in network features to access online content.

WARNING! Do not overload the receiver with excessive power.

Accessibility Features

Closed captions and audio descriptions can be enabled through the settings menu for enhanced accessibility.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Avoid using liquids or aerosols; keep away from heat sources.

Regulatory Information

Complies with FCC regulations for digital devices. For support, visit www.denon.com or contact customer service.

Troubleshooting

Reset: Menu > System > Reset if available.

Service: 1-800-555-0199; www.denon.com