Denon RC-897 Manual

The Denon RC-897 is a versatile remote control designed for use with various Denon audio and video components. It features an intuitive layout, allowing users to easily navigate and control their devices. The remote supports multiple functions including volume control, input selection, and playback options for CDs, DVDs, and streaming services. Below are key sections for features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Remote 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key features include: ergonomic design, backlit buttons, programmable keys, and compatibility with various Denon devices.

Feature	Description
Ergonomic Design	Comfortable grip for extended use
Backlit Buttons	Easy to use in low-light conditions
Programmable Keys	Customize functions for convenience
Device Compatibility	Works with multiple Denon audio/video components

Installation

Unpack the remote and insert batteries before use.

Open the battery compartment on the back of the remote.
Insert the batteries, ensuring correct polarity.
Close the battery compartment.
Point the remote at the device you wish to control.

WARNING! Do not mix old and new batteries; replace all batteries at the same time.

First-Time Setup

Power on your Denon device and ensure it is in the correct mode for remote control.

Press the corresponding device button on the remote.
Follow on-screen prompts to complete setup.
Test the remote functions to ensure proper operation.

CAUTION! Ensure the device is powered on during setup.

Specifications

Model: Denon RC-897
Battery Type: AA (2 required)
Range: Up to 30 feet
Weight: 0.5 lbs
Dimensions: 7.5 x 2.5 x 1 inches
Compatibility: Supports various Denon audio/video components

Controls and Settings

Access all functions through the clearly labeled buttons on the remote.

Key Functions: Power, Volume, Channel, Input Selection, Playback Controls.

Connecting Devices

Ensure your Denon devices are powered on and within range of the remote.

Point the remote towards the device.
Press the corresponding device button to control.
Ensure there are no obstacles blocking the IR signal.

Tip: For best performance, avoid direct sunlight on the remote sensor.

Operating the Remote

Use the remote to control playback, adjust volume, and switch inputs.

Press PLAY to start playback.
Use the VOLUME buttons to adjust sound levels.
Switch inputs using the INPUT button.

WARNING! Do not point the remote at bright lights or reflective surfaces.

Accessibility Features

The remote includes features for users with disabilities, such as tactile buttons and audible feedback.

Care & Cleaning

Keep the remote clean and free from dust.

CAUTION! Do not use liquids or abrasive materials for cleaning.

Regulatory Information

This remote complies with FCC regulations and is designed for residential use. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not respond	Batteries dead	Replace batteries with new ones.
Buttons not working	Obstruction	Remove any obstructions blocking the IR sensor.
Device not responding	Incorrect mode	Ensure the correct device button is pressed.
Limited range	Low batteries	Replace batteries and test range again.

Reset: Remove batteries for 10 seconds and reinstall.

Service: For assistance, contact Denon support.