Denon POA 800 Manual

The Denon POA 800 is a high-performance power amplifier designed to deliver exceptional audio quality for home theater and music systems. With its robust construction and advanced circuitry, the POA 800 provides powerful amplification for a wide range of speakers, ensuring a dynamic and immersive listening experience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Amplifier 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-current power supply, multiple speaker outputs, advanced protection circuitry, and a robust chassis design.

Feature	Description
High-current power supply	Delivers stable power for demanding audio applications
Multiple speaker outputs	Supports bi-wiring and bi-amping configurations
Advanced protection circuitry	Prevents damage from overheating and short circuits
Robust chassis design	Minimizes vibration and interference for cleaner sound
Remote control	Convenient operation from a distance

Installation

Unpack and inspect contents. Place the amplifier on a stable surface with adequate ventilation.

Connect speakers: Use high-quality speaker cables to connect to the output terminals.
Connect audio sources: Use RCA cables to connect to the input jacks.
Plug into AC power: Ensure the amplifier is turned off before connecting to power.

WARNING! Amplifier can get hot; ensure proper ventilation to avoid overheating.

First-Time Setup

Power on the amplifier; ensure all connections are secure.

Set input source: Use the input selector to choose the desired audio source.
Adjust volume: Start with a low volume and gradually increase to a comfortable level.
Check speaker connections: Ensure all connections are tight and secure.

CAUTION! Avoid sudden volume changes to prevent speaker damage.

Specifications

Power Output: 100 watts per channel (8 ohms).
Frequency Response: 20 Hz - 20 kHz.
Input Sensitivity: 1.2V.
Signal-to-Noise Ratio: 100 dB.
Dimensions: 17.1 x 14.2 x 5.9 inches.
Weight: 30 lbs.
Power Supply: 120V AC, 60Hz.

Controls and Settings

Access controls via the front panel: Power, Input Selector, Volume Control.

Remote: Power, Volume, Input Selector, Mute.

Adjust settings for optimal sound quality based on your listening environment.

Connecting Devices

Connect audio sources using RCA cables. Ensure all devices are powered off before making connections.

Match cables to ports (e.g., RCA to input).
Turn on the amplifier and select the appropriate input.

Tip: Use high-quality cables for the best audio performance.

Operating the Amplifier

Use the remote control or front panel to operate the amplifier.

Power on the amplifier.
Select the desired input source.
Adjust the volume to your preference.

WARNING! Avoid excessive volume levels to protect your speakers.

Maintenance

Regularly check connections and clean the amplifier with a dry cloth.

CAUTION! Unplug the amplifier before cleaning.

Regulatory Information

This product complies with FCC regulations for Class B digital devices. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cable disconnected	Check power connection and outlet.
No sound	Incorrect input selected	Select the correct input source.
Distorted sound	Overdriven volume	Reduce volume to prevent clipping.
Overheating	Poor ventilation	Ensure adequate airflow around the amplifier.

Reset: Unplug for 10 seconds to reset the amplifier.

Service: Contact Denon support for further assistance.