Denon POA 6600 User Manual

The Denon POA 6600 is a high-performance power amplifier designed for audiophiles seeking superior sound quality. With a robust build and advanced circuitry, it delivers exceptional audio fidelity and dynamic range. The amplifier features multiple input options, including balanced XLR and unbalanced RCA connections, making it versatile for various audio setups. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Amplifier 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance power amplifier, multiple input options, robust construction, advanced circuitry.

Feature	Description
Power Output	200 watts per channel at 8 ohms
Input Options	Balanced XLR and unbalanced RCA
Frequency Response	5 Hz to 100 kHz
Signal-to-Noise Ratio	110 dB
Protection Circuitry	Overload and thermal protection
Cooling System	Efficient heat dissipation design

Installation

Unpack and inspect the amplifier. Place it on a stable surface with adequate ventilation.

Connect audio sources: Use balanced or unbalanced inputs as needed.
Connect speakers: Ensure proper polarity when connecting speaker wires.
Plug into AC power: Use a suitable power outlet.

WARNING! Amplifier can get hot; ensure proper airflow around the unit.

First-Time Setup

Power on the amplifier; ensure all connections are secure.

Set input source: Use the input selector switch to choose the desired source.
Adjust volume: Start with a low volume and gradually increase.
Check speaker connections: Ensure all connections are tight and secure.

CAUTION! Avoid sudden volume changes to prevent speaker damage.

Specifications

Power Output: 200 watts per channel (8 ohms).
Frequency Response: 5 Hz - 100 kHz.
Signal-to-Noise Ratio: 110 dB.
Input Impedance: 20 kΩ (balanced), 10 kΩ (unbalanced).
Dimensions: 17.1 x 5.9 x 15.4 inches.
Weight: 40 lbs.
Power Consumption: 600 watts (maximum).

Controls and Settings

Access controls via the front panel: Power, Input Selector, Volume Control.

Remote: Power, Input Selection, Volume Control, Mute.

Adjust settings for optimal sound quality based on your audio environment.

Connecting Devices

Connect audio sources using the appropriate input connections.

Turn off all devices before connecting.
Match cables to ports (e.g., XLR to balanced input).
Power on the amplifier after all connections are made.

Tip: Use high-quality cables for the best audio performance.

Operating the Amplifier

Ensure the amplifier is powered on and select the desired input source.

Adjust volume to a comfortable level.
Monitor for any distortion; adjust settings as necessary.
Use the mute function when needed.

WARNING! Prolonged exposure to high volume can damage hearing.

Maintenance and Care

Unplug the amplifier before cleaning. Use a dry cloth to wipe the exterior.

CAUTION! Avoid using liquids or aerosols; keep away from moisture.

Regulatory Information

This device complies with FCC Part 15 regulations. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection and outlet.
No sound	Input source not selected	Select the correct input source.
Distorted sound	Overdriven volume	Reduce volume and check speaker connections.
Overheating	Poor ventilation	Ensure adequate airflow around the amplifier.

Reset: Unplug for 10 seconds to reset the amplifier.

Service: Contact Denon support for further assistance.