Denon POA 6600 Owners Manual

The Denon POA 6600 is a high-performance power amplifier designed to deliver exceptional audio quality for home theater and music systems. With its robust construction and advanced circuitry, the POA 6600 provides powerful amplification with low distortion, ensuring that your audio experience is both dynamic and immersive. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Amplifier 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance power amplifier, multiple input options, robust build quality, advanced thermal management, and low distortion output.

Feature	Description
Power Output	200 watts per channel at 8 ohms
Input Sensitivity	1.2V for rated output
Frequency Response	5 Hz to 100 kHz
Signal-to-Noise Ratio	100 dB
Dimensions	17.1 x 5.9 x 15.4 inches
Weight	50 lbs

Installation

Unpack and inspect contents. Place the amplifier on a stable surface with adequate ventilation.

Connect audio sources: Use RCA cables to connect to the input jacks.
Connect speakers: Use high-quality speaker wire to connect to the output terminals.
Plug into AC power: Ensure the power switch is off before connecting.

WARNING! Amplifier is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on the amplifier; ensure all connections are secure.

Set input source: Use the input selector switch to choose the desired source.
Adjust volume: Start with a low volume and gradually increase to a comfortable level.
Check speaker connections: Ensure all connections are tight and secure.

CAUTION! Ensure stable surface; use two people for handling if necessary.

Specifications

Power Output: 200 watts per channel at 8 ohms.
Frequency Response: 5 Hz to 100 kHz.
Input Sensitivity: 1.2V for rated output.
Signal-to-Noise Ratio: 100 dB.
Dimensions: 17.1 x 5.9 x 15.4 inches.
Weight: 50 lbs.
Power Consumption: 600 watts.

Controls and Settings

Access controls via the front panel: POWER, INPUT SELECTOR, VOLUME.

Remote: POWER, INPUT SELECTOR, VOLUME UP/DOWN, MUTE.

Adjust settings for optimal audio performance based on your environment.

Connecting Devices

Connect audio sources using RCA cables. Ensure all connections are secure.

Turn off the amplifier and devices before connecting.
Match cables to ports (e.g., RCA to input).
Select input via the input selector switch.

Tip: Ensure the amplifier is off before connecting cables.

Operating the Amplifier

Power on the amplifier and select the desired input source.

Adjust volume to a comfortable level.
Monitor temperature; ensure adequate ventilation.
Use the mute function as needed.

WARNING! Do not block ventilation; ensure proper airflow around the amplifier.

Maintenance and Care

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This device complies with FCC Part 15 regulations. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cable disconnected	Check power connection and outlet.
No sound	Incorrect input selected	Select the correct input source.
Distorted sound	Overdriven volume	Reduce volume to prevent clipping.
Overheating	Blocked ventilation	Ensure proper airflow around the amplifier.

Reset: Unplug for 10 seconds to reset the amplifier.

Service: Contact Denon support for assistance.