Denon PMA-500AE Manual

The Denon PMA-500AE is a high-quality integrated amplifier designed to deliver exceptional audio performance. With a power output of 70 watts per channel, it features advanced circuitry and a robust power supply to ensure clear and dynamic sound reproduction. The amplifier supports various input sources, including analog and digital connections, making it versatile for different audio setups. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Integrated amplifier, remote control, multiple input options, tone control, and headphone output.

Feature	Description
Power Output	70 watts per channel
Input Options	Multiple analog and digital inputs
Tone Control	Adjustable bass and treble settings
Headphone Output	For private listening
Remote Control	Convenient operation from a distance

Installation

Unpack and inspect contents. Place on a stable surface.

Connect speakers: Use speaker wire to connect to the output terminals.
Connect audio sources: Use RCA cables for analog inputs.
Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the amplifier; follow the setup instructions.

Select input source: Use the INPUT button on the remote.
Adjust volume: Use the volume knob or remote control.
Set tone controls: Adjust bass and treble as desired.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Power Output: 70 watts per channel (8 ohms).
Frequency Response: 5 Hz - 100 kHz.
Input Impedance: 47 kΩ.
Signal-to-Noise Ratio: 100 dB.
Dimensions: 434 x 151 x 329 mm.
Weight: 8.5 kg.
Power Supply: AC 120V, 60Hz.

Controls and Settings

Access controls via the front panel or remote. Key controls include power, input selection, volume, and tone adjustments.

Connecting Devices

Connect audio sources using RCA cables. Ensure all devices are powered off during connection.

Turn off the amplifier and devices before connecting.
Match cables to ports accordingly.
Select input via the INPUT button.

Tip: Ensure connections are secure to avoid audio issues.

Playing Audio Media

Supports various audio formats through connected devices.

Select input source: Use the INPUT button on the remote.
Adjust volume: Use the volume knob or remote control.
Enjoy your music!

WARNING! Avoid excessive volume to prevent speaker damage.

Accessibility Features

Remote control for easy access and operation from a distance.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

Complies with FCC regulations for residential use. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Incorrect input/source	Check input selection and connections.
Distorted sound	Overdriven volume	Reduce volume and check speaker connections.
Remote not working	Dead batteries	Replace batteries in the remote control.

Reset: Unplug the amplifier for a few minutes to reset.

Service: Contact Denon support for further assistance.