Denon DRW 660 Manual

The Denon DRW 660 is a dual cassette deck that offers high-quality audio playback and recording capabilities. It features Dolby B and C noise reduction, a variety of playback modes, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dual cassette decks, Dolby B/C noise reduction, RCA inputs/outputs, headphone jack, and remote control.

Feature	Description
Dual Cassette Decks	Allows simultaneous playback and recording from two tapes.
Dolby Noise Reduction	Reduces tape hiss for clearer sound.
RCA Inputs/Outputs	Standard connections for audio equipment.
Headphone Jack	For private listening.
Remote Control	Convenient operation from a distance.

Installation

Unpack and inspect contents. Place on a stable surface.

1. Connect audio sources: Use RCA cables to connect to your audio system.
2. Plug into AC power.
3. Ensure all connections are secure.

WARNING! Ensure proper ventilation and avoid placing heavy objects on the unit.

First-Time Setup

Power on the unit; follow on-screen prompts if available.

1. Set tape type: Select the appropriate tape type for playback/recording.
2. Adjust audio settings: Use the menu to configure sound settings.

CAUTION! Ensure stable surface; avoid exposure to moisture.

Specifications

• Type: Dual cassette deck.
• Noise Reduction: Dolby B and C.
• Frequency Response: 20 Hz - 20 kHz.
• Inputs: RCA audio inputs.
• Outputs: RCA audio outputs, headphone jack.
• Power Supply: AC 120V, 60Hz.
• Dimensions: 17.1 x 10.5 x 5.5 inches.

Controls and Settings

Access controls via the front panel: Play, Stop, Record, Rewind, Fast Forward.

Remote: Play, Stop, Record, Pause, and Navigation buttons.

Audio settings: Adjust volume, balance, and tone controls.

Connecting Devices

Connect to audio sources using RCA cables.

1. Turn off all devices before connecting.
2. Match cables to ports correctly.
3. Select input source on your audio system.

Tip: Ensure all connections are secure to avoid audio issues.

Playing Audio Media

Supports standard cassette tapes.

1. Insert tape: Load the cassette into the appropriate deck.
2. Play: Press the Play button to start playback.
3. Stop: Press Stop to halt playback.
4. Record: Press Record to start recording from the selected source.

WARNING! Do not force tape into the deck; handle with care.

Accessibility Features

Remote control for ease of use; headphone jack for private listening.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This device complies with FCC regulations for residential use. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; replace batteries.
No sound	Connections/mute	Check connections; ensure unit is not muted.
Tape not playing	Tape loaded incorrectly	Ensure tape is loaded properly.
Distorted sound	Dirty heads	Clean the tape heads with a cleaning cassette.

Reset: Refer to the user manual for reset instructions.

Service: Contact Denon support for assistance.