Denon DRW-585 Service Manual

The Denon DRW-585 is a high-performance dual cassette deck designed for audiophiles and music enthusiasts. It features advanced recording and playback capabilities, including Dolby B and C noise reduction, and a variety of playback modes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual cassette mechanism, Dolby B and C noise reduction, Auto-reverse playback, RCA input/output jacks, and remote control compatibility.

Feature	Description
Dual cassette mechanism	Allows simultaneous playback and recording from two tapes.
Dolby B/C noise reduction	Reduces tape hiss for clearer sound quality.
Auto-reverse playback	Automatically plays both sides of the tape.
RCA input/output jacks	For connecting to external audio devices.
Remote control	Convenient operation from a distance.

Installation

Unpack and inspect contents. Place on a stable surface near your audio system.

Connect audio sources: Use RCA cables to connect to your amplifier or receiver.
Plug into AC power: Ensure the unit is turned off before connecting.
Check connections: Ensure all cables are securely connected.

WARNING! Handle with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on the unit; follow the setup instructions in the manual.

Set the tape type: Use the selector switch to choose between normal, chrome, or metal tapes.
Adjust recording levels: Use the level meters to set optimal recording levels.
Test playback: Insert a tape and ensure sound quality is satisfactory.

CAUTION! Ensure stable surface; avoid placing heavy objects on top.

Specifications

Type: Dual cassette deck.
Noise Reduction: Dolby B and C.
Frequency Response: 20Hz - 20kHz.
Signal-to-Noise Ratio: 70dB.
Inputs: RCA audio inputs.
Outputs: RCA audio outputs.
Power Supply: 120V AC, 60Hz.
Dimensions: 17.1" x 10.6" x 5.5".

Controls and Settings

Access controls via the front panel: Play, Stop, Record, Rewind, Fast Forward, and Pause.

Remote: Control playback, recording, and navigation from a distance.

Adjustments: Set recording levels, tape type, and playback modes through the menu.

Connecting Devices

Connect to your audio system using RCA cables.

Turn off all devices before connecting.
Match cables to ports (e.g., output to amplifier).
Select input source on your amplifier/receiver.

Tip: Ensure all devices are powered off before making connections.

Playing Audio Media

Supports standard audio cassette tapes.

Insert tape: Press OPEN to load the cassette.
Play: Press PLAY to start playback.
Stop: Press STOP to halt playback.
Rewind/Fast Forward: Use the respective buttons to navigate the tape.
Record: Press RECORD to start recording from the selected source.

WARNING! Do not force the tape; eject properly.

Accessibility Features

Remote control for ease of use; accessible controls on the front panel.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure amplifier is on; check connections; adjust mute.
Playback issues	Tape damage/settings	Check tape for damage; ensure correct settings are selected.
Recording not working	Input source/menu	Ensure correct input source is selected; check recording settings.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Denon support for assistance.