Denon DRW 580 Manual

The Denon DRW 580 is a high-quality dual cassette deck designed for audiophiles and music enthusiasts. It features advanced recording and playback capabilities, including Dolby B and C noise reduction, and supports various tape formats. The DRW 580 is equipped with a range of features such as auto-reverse, a built-in timer, and a digital display for easy operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dual cassette decks, Dolby B/C noise reduction, auto-reverse, digital display, timer function.

Feature	Description
Dual cassette decks	Allows simultaneous recording and playback from two tapes
Dolby B/C noise reduction	Reduces tape hiss for clearer sound
Auto-reverse	Automatically plays both sides of the tape
Timer function	Allows for scheduled recordings
Digital display	Shows tape status and settings

Installation

Unpack and inspect contents. Place on a stable surface.

1. Connect to audio system: Use RCA cables to connect to amplifier or receiver.
2. Plug into AC power.
3. Ensure proper ventilation around the unit.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the unit; follow on-screen prompts if available.

1. Set the clock: Use the timer function to set the current time.
2. Test playback: Insert a tape and check playback functionality.
3. Adjust settings: Use the menu to adjust sound and recording options.

CAUTION! Ensure stable surface; avoid placing near heat sources.

Specifications

• Type: Dual cassette deck.
• Noise Reduction: Dolby B and C.
• Frequency Response: 20 Hz - 20 kHz.
• Signal-to-Noise Ratio: 70 dB.
• Power Supply: 120V AC, 60Hz.
• Dimensions: 17.1 x 10.6 x 5.5 inches.
• Weight: 10.5 lbs.

Controls and Settings

Access controls via the front panel: Play, Stop, Record, Rewind, Fast Forward.

Remote: Power, Play, Stop, Record, Rewind, Fast Forward, Timer.

Settings: Adjust recording levels, select tape type, and set timer functions.

Connecting Devices

Connect to audio sources using RCA cables. Ensure all devices are powered off before connecting.

1. Match cables to ports (e.g., red/white for audio).
2. Power on the audio system and the DRW 580.
3. Select the appropriate input on your audio system.

Tip: Ensure all connections are secure to avoid audio issues.

Playing Tapes

Supports standard cassette tapes.

1. Insert tape: Load the cassette into the deck.
2. Play: Press the PLAY button to start playback.
3. Stop: Press STOP to halt playback; eject with the EJECT button.
4. Rewind/Fast Forward: Use the respective buttons to navigate the tape.
5. Record: Press RECORD and PLAY simultaneously to start recording.

WARNING! Do not force tape into the deck; eject properly.

Accessibility Features

Closed captions are not applicable; however, the unit is designed for ease of use for all users.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This device complies with FCC regulations. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not power on	Power connection	Check power cable and outlet.
No sound during playback	Volume/mute settings	Ensure volume is up and mute is off.
Tape not playing	Improper loading	Ensure tape is loaded correctly.
Distorted sound	Dirty heads	Clean the tape heads with a cleaning kit.
Timer not working	Incorrect settings	Check timer settings and adjust as needed.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Denon support for assistance.