Denon DRM 800 Manual

The Denon DRM 800 is a high-quality cassette deck designed for audiophiles who appreciate the warmth and richness of analog sound. It features advanced tape handling capabilities, including auto-reverse, Dolby B and C noise reduction, and a variety of playback options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dual cassette mechanism, Dolby B/C noise reduction, auto-reverse playback, and high-speed dubbing capabilities.

Feature	Description
Auto-Reverse	Automatically plays both sides of the tape without manual intervention.
Dolby Noise Reduction	Reduces tape hiss for clearer sound quality.
High-Speed Dubbing	Allows for quick copying of tapes with minimal loss of quality.
Input/Output Jacks	Standard RCA connections for easy integration with other audio equipment.
LED Display	Provides clear information on playback status and tape direction.

Installation

Unpack the unit and place it on a stable surface. Ensure proper ventilation around the device.

1. Connect the power cord to a suitable AC outlet.
2. Connect audio input/output cables to your audio system.
3. Ensure that the tape heads are clean before use.

WARNING! Handle the unit with care to avoid damage. Ensure all connections are secure.

First-Time Setup

Power on the unit and follow the on-screen prompts if applicable.

1. Insert a cassette tape and press PLAY to test functionality.
2. Adjust the volume on your audio system for optimal sound.
3. Familiarize yourself with the controls and settings.

CAUTION! Ensure the unit is on a stable surface during operation.

Specifications

• Type: Dual cassette deck.
• Noise Reduction: Dolby B and C.
• Frequency Response: 20 Hz to 20 kHz.
• Signal-to-Noise Ratio: 70 dB (Dolby B).
• Inputs: RCA line in.
• Outputs: RCA line out.
• Power Supply: AC 120V, 60Hz.
• Dimensions: 17.5 x 10.5 x 5.5 inches.

Controls and Settings

Access playback controls via the front panel: PLAY, STOP, REWIND, FAST FORWARD, and RECORD.

Remote: If applicable, use the remote control for added convenience.

Adjust settings for playback speed, tape direction, and noise reduction as needed.

Connecting Devices

Connect to your audio system using standard RCA cables.

1. Turn off all devices before making connections.
2. Match the color-coded cables to the corresponding ports.
3. Power on the devices and select the appropriate input source.

Tip: Ensure all connections are secure to avoid signal loss.

Playing Cassette Media

Supports standard cassette tapes.

1. Insert the cassette tape into the deck.
2. Press PLAY to start playback.
3. Use REWIND and FAST FORWARD to navigate through the tape.
4. Press STOP to halt playback.
5. For recording, press RECORD and PLAY simultaneously.

WARNING! Do not force the tape into the deck; ensure it is inserted correctly.

Accessibility Features

Features include easy-to-read controls and an LED display for visibility.

Care & Cleaning

Unplug the unit before cleaning. Use a dry cloth to wipe the exterior; avoid liquids.

CAUTION! Do not use abrasive cleaners or solvents.

Regulatory Information

This device complies with FCC regulations for Class B digital devices. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Connections	Check all audio connections and ensure the unit is powered on.
Tape not playing	Incorrect insertion	Ensure the tape is inserted correctly and not damaged.
Distorted sound	Dirty heads	Clean the tape heads with a suitable cleaning solution.
Remote not working	Batteries	Replace the batteries in the remote control.

Reset: Refer to the manual for reset instructions if available.

Service: For service inquiries, contact Denon support.