Denon DRM-700 Manual

The Denon DRM-700 is a high-quality cassette deck designed for audiophiles, featuring advanced recording and playback capabilities. It supports both normal and metal tapes, offers Dolby B and C noise reduction, and includes various input/output options for versatile connectivity. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-fidelity cassette deck, Dolby B/C noise reduction, RCA input/output, headphone jack, and transport controls.

Feature	Description
Dolby B/C Noise Reduction	Reduces background noise for clearer sound.
High-Speed Dubbing	Allows fast copying of tapes.
Auto Reverse	Automatically plays both sides of the tape.
Headphone Jack	For private listening.
RCA Inputs/Outputs	For connecting to other audio devices.
Transport Controls	Play, Stop, Rewind, Fast Forward, Record.

Installation

Unpack and inspect contents. Place on a stable surface.

1. Connect to power: Plug the power cord into an AC outlet.
2. Connect audio sources: Use RCA cables to connect to your audio system.
3. Ensure all connections are secure before powering on.

WARNING! Handle with care to avoid damage.

First-Time Setup

Power on the unit; follow the setup instructions.

1. Set the tape type: Select the appropriate tape type switch.
2. Adjust levels: Use the input level controls for optimal sound.
3. Test playback: Insert a tape and check playback quality.

CAUTION! Ensure the unit is on a flat surface.

Specifications

• Type: Dual cassette deck.
• Frequency Response: 20 Hz - 20 kHz.
• Signal-to-Noise Ratio: 70 dB (Dolby C).
• Input/Output: RCA connectors, headphone jack.
• Power Supply: 120V AC, 60Hz.
• Dimensions: 17.5" W x 5.5" H x 11.5" D.
• Weight: 10 lbs.

Controls and Settings

Access controls via the front panel: Play, Stop, Rewind, Fast Forward, Record.

Remote: If applicable, use for additional convenience.

Adjust settings for playback quality, including input levels and tape type.

Connecting Devices

Connect to audio sources using RCA cables.

1. Turn off all devices before connecting.
2. Match cables to ports accordingly.
3. Select the correct input source on your audio system.

Tip: Ensure all connections are secure to avoid sound issues.

Playing Tapes

Supports normal and metal tapes.

1. Insert tape: Load the cassette into the deck.
2. Play: Press the Play button to start playback.
3. Stop: Press Stop to halt playback.
4. Fast Forward/Rewind: Use the respective buttons to navigate.
5. Record: Press Record to start recording from the selected source.

WARNING! Do not force the tape into the deck.

Accessibility Features

Ensure all controls are easily accessible for users with disabilities.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

Complies with FCC regulations for audio devices. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not power on	Power connection issue	Check power cord and outlet.
No sound	Incorrect input selection	Ensure correct input is selected.
Tape not playing	Tape jammed	Check for obstructions and clear.
Distorted sound	Dirty heads	Clean the tape heads with a cleaning kit.

Reset: If available, refer to the manual for reset instructions.

Service: Contact Denon support for further assistance.