Denon DRA 395 Service Manual

The Denon DRA 395 is a high-quality stereo receiver designed for audiophiles. It features advanced circuitry, multiple input options, and a robust power output to deliver exceptional sound quality. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-fidelity audio output, multiple input options, remote control, and built-in AM/FM tuner.

Feature	Description
Multiple Inputs	Supports various audio sources including CD, AUX, and phono.
Built-in Tuner	AM/FM radio with preset stations.
Remote Control	Convenient control from a distance.
High Power Output	Delivers clear and powerful sound.
Speaker Outputs	Connect up to two pairs of speakers.

Installation

Unpack and inspect contents. Place on a stable surface.

Connect speakers: Use speaker wire to connect to the output terminals.
Connect audio sources: Use RCA cables for CD, AUX, and other inputs.
Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

Program radio stations: Use the tuning buttons to find and save stations.
Set audio preferences: Adjust bass, treble, and balance settings.
Connect to external devices: Ensure all devices are properly connected.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Power Output: 70 watts per channel (8 ohms).
Frequency Response: 20 Hz - 20 kHz.
Input Impedance: 47 kOhms (line).
Dimensions: 17.1 x 5.5 x 13.4 inches.
Weight: 18.5 lbs.
Supported Formats: Stereo audio, AM/FM radio.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access settings via the front panel or remote control. Key controls include power, volume, input selection, and tuning.

Remote: POWER, INPUT, VOLUME, TUNING, and preset buttons.

Audio settings: Adjust bass, treble, balance, and loudness settings.

Connecting Devices

Connect audio sources using RCA cables. Ensure all devices are powered off before connecting.

Match cables to ports (e.g., RCA to CD input).
Select input via the remote control.

Tip: Ensure all connections are secure for optimal performance.

Playing Audio Media

Supports various audio formats including CD and FM radio.

Insert disc: Load CD into the tray.
Play: Press PLAY; select tracks using numeric buttons.
Stop: Press STOP to halt playback.
Skip: Use PREV/NEXT for tracks.

WARNING! Do not force discs into the tray; eject properly.

Accessibility Features

Remote control provides easy access to all functions for users with mobility challenges.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Sound distortion	Volume too high	Lower volume to prevent clipping.
Channels not programming	Antenna/menu	Use auto-program in menu; ensure antenna connected.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.