Denon DRA 395 Manual

The Denon DRA 395 is a high-quality stereo receiver that delivers exceptional audio performance. It features a range of connectivity options, including multiple audio inputs, AM/FM radio, and a built-in phono input for vinyl enthusiasts. The receiver is designed to provide a rich and immersive listening experience, with advanced sound processing capabilities and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stereo receiver, AM/FM tuner, multiple audio inputs, built-in phono input, remote control, and adjustable sound settings.

Feature	Description
AM/FM Tuner	For listening to radio stations
Phono Input	For connecting turntables
Multiple Audio Inputs	Connect various audio sources
Remote Control	Convenient control from a distance
Adjustable Sound Settings	Customize audio output to preference

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

1. Connect speakers: Use speaker wire to connect to the receiver's output terminals.
2. Connect audio sources: Use RCA cables for CD players, turntables, etc.
3. Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

1. Select input source: Use the INPUT button to cycle through connected devices.
2. Adjust volume: Use the volume knob or remote control.
3. Set radio stations: Use the tuning buttons to find and save stations.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

• Power Output: 70 watts per channel.
• Audio Inputs: 5 RCA inputs, 1 phono input.
• Tuner: AM/FM with 30 preset stations.
• Dimensions: 17.1 x 5.9 x 13.4 inches.
• Weight: 20.5 lbs.
• Power Supply: 120V AC, 60Hz.
• Operating Temperature: Standard room temperature.

Controls and Settings

Access settings via the front panel or remote control. Key controls include power, volume, input selection, and tuning.

Remote: Power, volume, input selection, and preset tuning buttons.

Audio settings: Bass, treble, balance, and loudness controls available.

Connecting Devices

Connect speakers and audio sources using appropriate cables.

1. Turn off the receiver and devices before connecting.
2. Match cables to ports (e.g., RCA to audio inputs).
3. Select input via the INPUT button on the receiver or remote.

Tip: Ensure all connections are secure for optimal performance.

Playing Audio Media

Supports various audio formats including CD, vinyl, and streaming devices.

1. Insert media: Load CD or connect streaming device.
2. Play: Select input source and press play.
3. Adjust volume: Use the volume control.
4. Skip tracks: Use the remote control for track navigation.

WARNING! Do not force media into the player; handle with care.

Accessibility Features

Remote control provides easy access to all functions, including volume and input selection.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Sound distortion	Volume too high	Reduce volume; check speaker connections.
Radio stations not tuning	Antenna/menu	Ensure antenna is connected; use auto-tune feature.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.