Denon DRA 345R Manual

The Denon DRA 345R is a high-quality stereo receiver designed to deliver exceptional audio performance. It features a range of inputs for various audio sources, including FM/AM radio, CD players, and auxiliary devices. With its robust build and advanced technology, the DRA 345R provides a rich listening experience for music enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stereo receiver, FM/AM tuner, multiple audio inputs, remote control, and adjustable sound settings.

Feature	Description
FM/AM Tuner	Built-in tuner for radio stations
Multiple Inputs	Supports CD, AUX, and other audio sources
Remote Control	Convenient control from a distance
Adjustable Sound Settings	Customize bass, treble, and balance
Speaker Outputs	Connect up to two pairs of speakers

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

1. Connect speakers: Use speaker wire to connect to the output terminals.
2. Connect audio sources: Use RCA cables for CD players and AUX devices.
3. Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

1. Program radio stations: Use the tuning buttons to scan for available stations.
2. Set audio preferences: Adjust bass, treble, and balance settings.
3. Connect to additional devices as needed.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

• Power Output: 100W per channel.
• Frequency Response: 20Hz - 20kHz.
• Inputs: 4 x RCA, 1 x AUX, 1 x Phono.
• Tuner: FM/AM with 30 presets.
• Speaker Impedance: 4-16 Ohms.
• Dimensions: 17.1 x 5.9 x 13.4 inches.
• Weight: 18.5 lbs.

Controls and Settings

Access settings via the front panel or remote control. Key controls include power, volume, input selection, and tuning.

Remote: Power, volume, input selection, and preset buttons.

Audio settings: Adjust bass, treble, and balance through the menu.

Connecting Devices

Connect audio sources using RCA cables. Ensure all devices are powered off before connecting.

1. Match cables to ports (e.g., RCA to CD).
2. Turn on the receiver and select the appropriate input.

Tip: Keep cables organized to avoid interference.

Playing Audio Media

Supports various audio formats through connected devices.

1. Power on the receiver and select the input source.
2. Play audio from the connected device.
3. Adjust volume and sound settings as desired.

WARNING! Avoid high volume levels to prevent speaker damage.

Accessibility Features

Remote control provides easy access to all functions for users with mobility challenges.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Do not use liquids or aerosols; keep away from moisture.

Regulatory Information

This device complies with FCC regulations. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; replace batteries.
No sound	Connections/mute	Check connections; ensure mute is off.
Distorted sound	Volume too high	Lower volume and check speaker connections.
Radio not tuning	Antenna issue	Check antenna connection; reposition if necessary.

Reset: Refer to the manual for reset instructions.

Service: Contact customer support for assistance.