Denon DP-31LP Manual

The Denon DP-31LP is a high-quality turntable designed for audiophiles who appreciate the warmth and depth of vinyl records. This model features a belt-drive system, a built-in phono preamp, and a high-performance cartridge, ensuring exceptional sound quality. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Belt-drive system, built-in phono preamp, high-performance cartridge, adjustable tracking force, anti-skate control.

Feature	Description
Belt-drive system	Provides smooth and stable rotation for optimal sound quality
Built-in phono preamp	Allows direct connection to standard audio inputs
High-performance cartridge	Delivers accurate sound reproduction
Adjustable tracking force	Ensures proper stylus pressure for different records
Anti-skate control	Prevents skipping and distortion during playback

Installation

Unpack and inspect contents. Place on a stable surface away from direct sunlight.

1. Connect the turntable to your audio system using the provided RCA cables.
2. Plug the power adapter into an electrical outlet.
3. Ensure the turntable is level for optimal performance.

WARNING! Handle with care to avoid damage. Ensure all connections are secure.

First-Time Setup

Power on the turntable and follow the setup instructions.

1. Adjust the tracking force according to the cartridge specifications.
2. Set the anti-skate control to match the tracking force.
3. Place a record on the platter and lower the tonearm to begin playback.

CAUTION! Ensure the turntable is on a stable surface during setup.

Specifications

• Drive Type: Belt-drive.
• Speed: 33 1/3 and 45 RPM.
• Cartridge Type: MM (Moving Magnet).
• Output: Built-in phono preamp with RCA output.
• Dimensions: 420 x 350 x 120 mm.
• Weight: 3.5 kg.
• Power Supply: AC 100-240V, 50/60Hz.

Controls and Settings

Access settings via the front panel controls. Key controls include POWER, START/STOP, and tonearm lift.

Adjustments: Tracking force, anti-skate, and speed selection.

Connecting Devices

Connect to your audio system using RCA cables. Ensure the turntable is powered off during connections.

1. Match the RCA cables to the corresponding inputs on your amplifier or receiver.
2. Plug in the power adapter to an electrical outlet.

Tip: Ensure all connections are secure to avoid sound issues.

Playing Vinyl Records

Supports standard 12-inch and 7-inch vinyl records.

1. Place a record on the platter and press START.
2. Lower the tonearm to begin playback.
3. Adjust volume on your audio system as needed.
4. To stop playback, lift the tonearm and press STOP.

WARNING! Handle records by the edges to avoid fingerprints.

Accessibility Features

Ensure easy access to controls for all users. The turntable is designed for straightforward operation.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth to clean the turntable. Avoid using liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This device complies with FCC Part 15 regulations. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Turntable does not power on	Power connection	Check power adapter and outlet connection.
No sound	Connection issue	Ensure RCA cables are connected properly.
Skipping records	Tracking force/anti-skate	Adjust tracking force and anti-skate settings.
Distorted sound	Dirty records	Clean records and stylus.

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact Denon customer support.