Denon DN-H800 Manual

The Denon DN-H800 is a professional dual CD player designed for DJs and audio enthusiasts. It features advanced playback options, including seamless looping, pitch control, and a variety of audio effects. With its intuitive interface and robust build quality, the DN-H800 is perfect for both live performances and studio use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dual CD players, Pitch control, Seamless looping, Audio effects, USB connectivity.

Feature	Description
Dual CD Players	Allows simultaneous playback of two CDs
Pitch Control	Adjusts playback speed for beat matching
Seamless Looping	Creates loops without interruption
USB Connectivity	Supports playback from USB devices
Audio Effects	Includes echo, flanger, and more
Robust Build	Designed for durability in live settings

Installation

Unpack and inspect contents. Place on a stable surface.

1. Connect power supply: Plug into a suitable AC outlet.
2. Connect audio outputs: Use RCA cables to connect to mixer or amplifier.
3. Connect USB devices: Insert USB drive into the USB port.

WARNING! Ensure all connections are secure to avoid equipment damage.

First-Time Setup

Power on the unit; follow on-screen prompts.

1. Select audio source: Use the SOURCE button to choose between CD and USB.
2. Adjust settings: Access the setup menu to configure audio preferences.
3. Test playback: Insert a CD or USB drive and play a track.

CAUTION! Ensure stable surface; avoid exposure to moisture.

Specifications

• Audio Formats: CD, MP3, WAV.
• Output Level: 2V RMS.
• Frequency Response: 20 Hz - 20 kHz.
• Signal-to-Noise Ratio: 90 dB.
• Power Supply: AC 120V, 60Hz.
• Dimensions: 19" x 3.5" x 10".
• Weight: 10 lbs.

Controls and Settings

Access settings via the main menu. Front Panel: Play, Pause, Stop, Cue, Loop.

Remote: Play, Stop, Track Skip, Pitch Control, Loop.

Audio Settings: Adjust EQ, effects, and output levels through the menu.

Connecting Devices

Audio: Use RCA outputs for connection to mixers or amplifiers. USB: Connect USB drives for playback.

1. Turn off all devices before connecting.
2. Match cables to ports correctly.
3. Select input source on the DN-H800.

Tip: Ensure all devices are powered off during connections.

Playing Audio Media

Supports CD and USB playback.

1. Insert disc or USB: Load media into the appropriate slot.
2. Play: Press PLAY to start playback.
3. Stop: Press STOP to halt playback.
4. Skip: Use TRACK buttons to navigate through tracks.
5. Loop: Press LOOP to create a seamless loop.

WARNING! Do not force discs into the player; handle with care.

Accessibility Features

Adjustable settings for audio output to accommodate various hearing needs.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure mixer/amplifier is on; check connections; adjust mute.
Disc not playing	Disc/loading	Ensure disc loaded properly; eject and reload; check for damage.
USB not recognized	File format	Ensure USB drive is formatted correctly and files are supported.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.