Denon DN 500C Manual

The Denon DN 500C is a versatile CD player and media player designed for professional audio applications. It features a robust design, high-quality audio playback, and a variety of connectivity options, making it ideal for use in commercial environments such as restaurants, bars, and event spaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: CD player, USB input, Bluetooth connectivity, RCA outputs, headphone jack, and remote control.

Feature	Description
CD Player	Plays standard audio CDs and CD-R/RW discs
USB Input	For playback of audio files from USB drives
Bluetooth Connectivity	Stream audio wirelessly from compatible devices
RCA Outputs	For connecting to amplifiers or mixers
Headphone Jack	For private listening
Remote Control	Convenient control from a distance

Installation

Unpack and inspect contents. Place on a stable surface.

1. Connect power: Plug into an AC outlet.
2. Connect audio outputs: Use RCA cables to connect to your audio system.
3. Connect USB devices: Insert USB drive into the USB port for playback.
4. Set up Bluetooth: Pair with your Bluetooth-enabled device.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the device; follow on-screen prompts.

1. Select input source: Use the INPUT button to choose between CD, USB, or Bluetooth.
2. Adjust settings: Access the setup menu to configure audio settings.
3. Test playback: Insert a CD or connect a USB drive to ensure functionality.

CAUTION! Ensure stable surface; avoid exposure to moisture.

Specifications

• Audio Formats Supported: CD, CD-R/RW, MP3, WAV.
• Output Power: 20W RMS.
• Frequency Response: 20 Hz - 20 kHz.
• Connectivity: RCA, USB, Bluetooth.
• Power Supply: 120V AC, 60Hz.
• Dimensions: 17.5 x 10.5 x 3.5 inches.
• Weight: 5.5 lbs.

Controls and Settings

Access controls via the front panel or remote. Key controls include POWER, PLAY, PAUSE, STOP, and INPUT.

Remote: POWER, PLAY, PAUSE, SKIP, REWIND, FAST FORWARD, INPUT SELECT.

Audio settings: Adjust volume, balance, and equalizer settings through the menu.

Connecting Devices

Connect audio sources via RCA or USB. For Bluetooth, ensure the device is in pairing mode.

1. Turn off the device before connecting.
2. Match cables to ports (e.g., RCA to audio outputs).
3. Select input via the INPUT button.

Tip: Ensure the device is powered off before connecting cables.

Playing Media

Supports CD playback, USB audio files, and Bluetooth streaming.

1. Insert CD: Load the disc into the tray.
2. Play: Press PLAY to start playback.
3. Stop: Press STOP to halt playback; eject with the OPEN button.
4. Skip: Use SKIP buttons to navigate tracks.
5. Bluetooth: Select Bluetooth input to stream audio from your device.

WARNING! Do not force the disc; eject properly.

Accessibility Features

Closed Captions: Enable in the settings menu if supported by media.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure the device is on; check connections; adjust mute.
Disc not playing	Disc/loading	Ensure the disc is loaded properly; eject and reload; check for damage.
Bluetooth not connecting	Device not in pairing mode	Ensure the Bluetooth device is in pairing mode and within range.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.