Denon DCM 5000 Manual

The Denon DCM 5000 is a high-performance CD changer designed for audiophiles. It features a 5-disc carousel, advanced digital signal processing, and a variety of playback options including random and repeat modes. The DCM 5000 supports various CD formats and is equipped with a remote control for convenient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 5-disc carousel, remote control, digital output, analog output, headphone jack.

Feature	Description
5-Disc Carousel	Holds up to five CDs for continuous playback
Digital Output	For connection to digital audio devices
Analog Output	For connection to analog audio devices
Headphone Jack	For private listening
Remote Control	Convenient operation from a distance

Installation

Unpack and inspect contents. Place on a stable surface.

1. Connect audio outputs: Use RCA cables for analog output.
2. Connect digital output: Use optical or coaxial cable for digital connection.
3. Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the DCM 5000; follow on-screen prompts.

1. Load CDs: Open the carousel and insert discs.
2. Set audio output: Choose between digital and analog output.
3. Adjust settings: Use the remote to navigate the setup menu.

CAUTION! Ensure stable surface; avoid placing heavy objects on top.

Specifications

• Disc Capacity: 5 CDs.
• Audio Output: Digital (optical/coaxial) and analog (RCA).
• Supported Formats: CD, CD-R, CD-RW.
• Frequency Response: 20 Hz - 20 kHz.
• Signal-to-Noise Ratio: 100 dB.
• Power Source: 120V AC, 60Hz.
• Dimensions: 17.1 x 14.2 x 5.5 inches.

Controls and Settings

Access settings via the remote control. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, SKIP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, INPUT, VOLUME, REPEAT, RANDOM.

Audio settings: Adjust volume, balance, and tone controls. Playback options: Select repeat modes and shuffle playback.

Connecting Devices

Audio: Use RCA for analog output or optical/coaxial for digital output.

1. Turn off the DCM 5000 and devices before connecting.
2. Match cables to ports (e.g., RCA to analog output).
3. Select input on your audio device.

Tip: Ensure the DCM 5000 is off before connecting cables.

Playing CD Media

Supports standard CDs, CD-R, and CD-RW.

1. Insert disc: Press OPEN/CLOSE, load CD.
2. Play: Press PLAY; select track with numeric buttons or arrows.
3. Stop: Press STOP; eject with OPEN/CLOSE.
4. Skip: Use SKIP buttons for tracks.
5. Repeat: Press REPEAT for repeat options.
6. Random: Press RANDOM for shuffle playback.

WARNING! Do not force discs; eject properly.

Accessibility Features

Remote control provides easy access to all functions for users with mobility challenges.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure audio device is on; check connections; adjust volume.
Disc not playing	Disc/loading	Ensure disc loaded properly; eject and reload; check for damage.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Denon support for assistance.