Denon DCD-800 Manual

The Denon DCD-800 is a high-quality CD player designed to deliver exceptional audio performance. It features advanced digital processing, a precision transport mechanism, and a range of connectivity options to enhance your listening experience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-precision CD transport, digital-to-analog converter, remote control, various audio outputs including optical and coaxial.

Feature	Description
High-Precision Transport	Ensures accurate playback of audio CDs
Digital-to-Analog Converter	Delivers high-quality sound reproduction
Remote Control	Convenient operation from a distance
Optical Output	For digital audio connection to receivers
Coaxial Output	Alternative digital audio connection
Headphone Jack	For private listening
Display	Shows track information and playback status

Installation

Unpack and inspect the contents. Place the unit on a stable surface.

1. Connect audio outputs: Use optical or coaxial cables to connect to your audio receiver.
2. Plug into AC power.
3. Ensure proper ventilation around the unit.

WARNING! Handle with care to avoid damage. Ensure all connections are secure.

First-Time Setup

Power on the CD player; follow on-screen prompts if applicable.

1. Set the audio output: Choose between optical or coaxial in the settings menu.
2. Adjust volume levels on your receiver for optimal sound.

CAUTION! Ensure stable surface; avoid placing near heat sources.

Specifications

• Audio Formats: CD, CD-R, CD-RW.
• Frequency Response: 2 Hz - 20 kHz.
• Signal-to-Noise Ratio: 110 dB.
• Dynamic Range: 100 dB.
• Output Voltage: 2.0 V (RMS).
• Power Supply: AC 120V, 60Hz.
• Dimensions: 17.1 x 12.2 x 3.9 inches.
• Weight: 6.6 lbs.

Controls and Settings

Access settings via the front panel buttons or remote control. Key controls include PLAY, STOP, PAUSE, and SKIP.

Remote: POWER, PLAY, PAUSE, SKIP, REWIND, FAST FORWARD, and INPUT SELECT.

Connecting Devices

Connect to your audio receiver using optical or coaxial cables. Ensure all devices are powered off before making connections.

1. Match cables to ports (e.g., optical to optical).
2. Power on the CD player and receiver.
3. Select the appropriate input on your receiver.

Tip: Ensure all connections are secure to avoid audio issues.

Playing CD Media

Supports standard audio CDs, CD-R, and CD-RW.

1. Insert disc: Press OPEN, load CD.
2. Play: Press PLAY; select track with SKIP buttons.
3. Stop: Press STOP to halt playback.
4. Pause: Press PAUSE to temporarily stop playback.
5. Skip: Use SKIP for next/previous tracks.

WARNING! Do not force the disc; eject properly.

Accessibility Features

Closed captions are not applicable for CD media. Ensure volume is set appropriately for clear audio.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust volume.
Disc not playing	Disc/loading	Ensure disc is loaded properly; eject and reload; check for damage.

Reset: Refer to the user manual for reset instructions.

Service: Contact Denon support for assistance.