Denon DCD-660 Manual

The Denon DCD-660 is a high-performance CD player designed to deliver exceptional audio quality. With its advanced digital-to-analog conversion technology, it ensures that every note is reproduced with clarity and precision. The DCD-660 supports various CD formats, including standard CDs, CD-R, and CD-RW, making it a versatile addition to any audio setup. Below are key sections for features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-precision CD transport, digital output, analog output, remote control, and various playback modes.

Feature	Description
High-precision CD transport	Ensures accurate reading of discs for optimal sound quality
Digital output	Allows connection to external DACs or digital audio systems
Analog output	For direct connection to amplifiers or receivers
Remote control	Convenient operation from a distance
Playback modes	Repeat, shuffle, and program playback options

Installation

Unpack and inspect contents. Place the CD player on a stable surface.

Connect to your audio system: Use RCA cables for analog output or digital cables for digital output.
Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the CD player; follow on-screen prompts if applicable.

Select output mode: Choose between digital or analog output based on your setup.
Adjust settings: Use the menu to customize playback options.

CAUTION! Ensure stable surface; avoid placing near heat sources.

Specifications

Audio Output: Analog (RCA), Digital (Coaxial, Optical).
Supported Formats: CD, CD-R, CD-RW.
Frequency Response: 2 Hz - 20 kHz.
Signal-to-Noise Ratio: 110 dB.
Power Consumption: 15W.
Dimensions: 430 mm x 320 mm x 100 mm.
Weight: 3.5 kg.

Controls and Settings

Access settings via the front panel or remote control. Key controls include Play, Stop, Pause, and Skip.

Remote: Includes buttons for all major functions, including playback modes and volume control.

Connecting Devices

Connect to your audio system using the appropriate cables.

Turn off all devices before connecting.
Match cables to ports (e.g., RCA to analog output).
Power on the CD player and select the appropriate input on your audio system.

Tip: Ensure all connections are secure for optimal performance.

Playing CD Media

Supports standard CDs, CD-R, and CD-RW.

Insert disc: Load the CD into the tray and close.
Play: Press PLAY to start playback.
Stop: Press STOP to halt playback.
Skip: Use SKIP buttons to navigate tracks.
Repeat: Press REPEAT to loop a track or entire disc.

WARNING! Do not force the tray open; use the OPEN button.

Accessibility Features

Closed captions are not applicable; however, the player is designed for ease of use for all users.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Avoid using liquids or aerosols; keep away from moisture.

Regulatory Information

This device complies with FCC regulations. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; replace batteries.
No sound	Connections/mute	Check connections; ensure volume is up.
Disc not playing	Disc/loading	Ensure disc is loaded correctly; check for damage.
Skipping tracks	Dirty lens	Clean the lens with a CD lens cleaner.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Denon support for assistance.