Denon AVR S910W Manual

The Denon AVR S910W is a versatile 7.2 channel AV receiver that supports various audio and video formats, including Dolby Atmos and DTS:X. It features advanced connectivity options, including Wi-Fi, Bluetooth, and HDMI inputs, allowing seamless integration with your home entertainment system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio/Video Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel surround sound, Wi-Fi and Bluetooth connectivity, multiple HDMI inputs, and advanced audio processing capabilities.

FeatureDescription
7.2 Channel Surround SoundDelivers immersive audio experience with multiple speaker configurations.
Wi-Fi & BluetoothStream music wirelessly from your devices.
HDMI InputsMultiple inputs for connecting various devices like Blu-ray players and gaming consoles.
Dolby Atmos & DTS:XSupports advanced audio formats for enhanced surround sound.
On-Screen DisplayEasy navigation through settings and options.

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

  1. Connect speakers: Use appropriate speaker wire for connections.
  2. Connect video sources: Use HDMI cables for video input.
  3. Plug into AC power.
  4. Connect to network: Use Wi-Fi or Ethernet for internet access.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

  1. Set up speakers: Use the built-in setup assistant for speaker configuration.
  2. Connect to Wi-Fi: Select your network and enter the password.
  3. Update firmware: Check for updates in the settings menu.
  4. Adjust audio settings: Use the menu to configure sound profiles.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Controls and Settings

Access settings via the on-screen display or remote control. Key functions include volume control, input selection, and audio adjustments.

Remote: POWER, INPUT, VOLUME, MUTE, MENU, and navigation buttons.

Audio settings: Adjust bass, treble, and balance. Video settings: Configure picture modes and aspect ratios.

Connecting Devices

Connect devices using HDMI, optical, or RCA cables.

  1. Turn off the receiver and devices before connecting.
  2. Match cables to ports (e.g., HDMI to HDMI).
  3. Select input via the remote control.

Tip: Ensure all devices are powered off during connections.

Playing Audio/Video Media

Supports various media formats for playback.

  1. Insert media: Use the appropriate input source.
  2. Play: Use the remote control to start playback.
  3. Stop: Press STOP to halt playback.
  4. Skip: Use PREV/NEXT for tracks or chapters.
  5. Adjust volume: Use the volume control on the remote.

WARNING! Do not force connections; handle media with care.

Accessibility Features

Closed Captions: Enable in the settings menu. Audio descriptions available for supported content.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth; avoid liquids.

CAUTION! Do not use abrasive cleaners; keep away from moisture.

Regulatory Information

FCC Part 15: Complies with interference limits for residential use. For support, visit www.denon.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Remote does not workObstacles/batteriesRemove obstacles; point at IR sensor; install fresh batteries.
No soundConnections/muteEnsure receiver is on; check connections; adjust mute.
Picture not clearSettingsAdjust video settings in the menu.
Channels not programmingAntenna/menuUse auto-program in the menu; ensure antenna connected.
Media not playingMedia/loadingEnsure media is loaded properly; check for damage.

Reset: Menu > System > Reset if available.

Service: Visit www.denon.com for support.

Denon AVR S910W Manual © - All Rights Reserved 2026