Denon AVR S700W Service Manual

The Denon AVR S700W is a high-performance 7.2 channel AV receiver that supports advanced audio and video formats. It features built-in Wi-Fi, Bluetooth, and AirPlay for seamless streaming, along with multiple HDMI inputs for connecting various devices. The receiver is designed for easy setup and operation, providing an immersive home theater experience with Dolby Atmos and DTS:X support. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel audio, Wi-Fi, Bluetooth, AirPlay, HDMI inputs, Dolby Atmos, DTS:X.

Feature	Description
7.2 Channel Audio	Supports immersive surround sound for home theater.
Wi-Fi & Bluetooth	Stream music wirelessly from various devices.
HDMI Inputs	Multiple inputs for connecting video sources.
Dolby Atmos	Advanced audio technology for 3D sound experience.
DTS:X	Object-based audio for enhanced sound placement.
On-Screen Display	User-friendly interface for easy navigation.
Remote Control	Convenient control of all functions from a distance.

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

Connect speakers: Use appropriate speaker wire for connections.
Connect video sources: Use HDMI cables for video input.
Connect to network: Use Wi-Fi or Ethernet for internet access.
Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts for initial setup.

Set up network: Connect to Wi-Fi or Ethernet.
Program channels: Use the setup menu to configure channels.
Adjust audio settings: Access the audio menu for sound preferences.
For streaming: Set up accounts for services like Spotify or Pandora.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Channels: 7.2
Power Output: 80W per channel (8 ohms)
Audio Formats: Dolby Atmos, DTS:X, PCM
Video Inputs: 6 HDMI inputs, 1 HDMI output
Network: Wi-Fi, Ethernet, Bluetooth
Dimensions: 17.1 x 13.4 x 6.3 inches
Weight: 22.5 lbs
Power Consumption: 500W

Controls and Settings

Access OSD via remote control or front panel buttons. Key controls include POWER, INPUT, VOLUME, and MENU.

Remote: POWER, INPUT, VOLUME, MUTE, MENU, and numeric buttons.

Audio settings: Adjust bass, treble, and balance. Video settings: Configure resolution and aspect ratio.

Connecting Devices

Connect speakers, video sources, and network devices as per the installation guide.

Turn off the receiver and devices before connecting.
Match cables to ports (e.g., HDMI to HDMI).
Select input via remote control.

Tip: Ensure all devices are powered off during connections.

Playing Media

Supports various audio and video formats.

Power on the receiver and select the input source.
Play media from connected devices or streaming services.
Adjust volume and audio settings as needed.
Use the remote for playback controls.

WARNING! Avoid excessive volume levels to prevent speaker damage.

Accessibility Features

Closed Captions: Enable in settings for accessible viewing.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 Denon; trademarks of Denon Electronics. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; replace batteries.
No sound	Connections/mute	Check connections; ensure mute is off.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Menu/antenna	Use auto-program in the menu; ensure antenna is connected.
Device not recognized	Connection issue	Check connections; restart the receiver.

Reset: Menu > System > Reset if available.

Service: Contact customer support for assistance.