Denon AVR S700W Manual

The Denon AVR S700W is a versatile 7.2 channel AV receiver that supports a wide range of audio and video formats. It features advanced audio processing, including Dolby Atmos and DTS:X, allowing for an immersive home theater experience. With built-in Wi-Fi, Bluetooth, and AirPlay, you can easily stream music from your favorite services. The receiver also includes multiple HDMI inputs, making it easy to connect various devices. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio/Video Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel audio, Dolby Atmos, DTS:X, Wi-Fi, Bluetooth, AirPlay, multiple HDMI inputs, and advanced audio processing.

Feature	Description
7.2 Channel Audio	Supports up to 7 speakers and 2 subwoofers for immersive sound.
Dolby Atmos	Provides a three-dimensional sound experience.
DTS:X	Advanced audio codec for dynamic sound placement.
Wi-Fi & Bluetooth	Stream music wirelessly from various devices.
HDMI Inputs	Multiple inputs for connecting various devices.
On-Screen Display	User-friendly interface for easy navigation.
Remote Control	Convenient control of all functions.
Multi-Room Audio	Supports audio playback in multiple rooms.

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

Connect speakers: Use appropriate speaker wire for connections.
Connect video sources: Use HDMI cables for video input.
Connect to power: Plug the receiver into an AC outlet.
Connect to network: Use Wi-Fi or Ethernet for internet access.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts to configure settings.

Set up speakers: Use the built-in setup assistant for speaker configuration.
Connect to Wi-Fi: Select your network and enter the password.
Update firmware: Check for updates in the settings menu.
Program channels: Use the receiver's menu to program available channels.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Channels: 7.2
Audio Formats: Dolby Atmos, DTS:X, Dolby TrueHD
Video Formats: 4K Ultra HD, HDR10, Dolby Vision
HDMI Inputs: 6
Power Output: 75W per channel (8 ohms)
Weight: 20 lbs
Dimensions: 17.1 x 13.3 x 6.3 inches
Power Source: 120V AC, 60Hz

Controls and Settings

Access the on-screen display via the remote control. Key controls include POWER, INPUT, VOLUME, and MENU.

Remote: Provides access to all functions, including audio settings and input selection.

Audio settings: Adjust bass, treble, and balance. Video settings: Adjust brightness, contrast, and color.

Connecting Devices

Connect various devices using HDMI, optical, or analog inputs.

Turn off all devices before connecting.
Match cables to ports (e.g., HDMI to HDMI).
Select input via the remote control.

Tip: Ensure all devices are powered off during connections.

Playing Audio/Video Media

Supports various audio and video formats for playback.

Insert media: Use the appropriate input for your device.
Play: Use the remote control to start playback.
Stop: Press STOP to halt playback.
Skip: Use the PREV/NEXT buttons for tracks or chapters.
Adjust volume: Use the VOLUME control on the remote.

WARNING! Do not force connections; ensure proper insertion.

Accessibility Features

Supports closed captions and audio descriptions for enhanced accessibility.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Antenna/menu	Use auto-program in menu; ensure antenna connected.
Device not recognized	Connection issue	Check connections and restart the receiver.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.