Denon AVR-E200 User Manual

The Denon AVR-E200 is a versatile 5.1 channel AV receiver that delivers high-quality audio and video performance. It supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, and features multiple HDMI inputs for connecting your devices. The receiver also includes built-in Bluetooth for wireless streaming, an intuitive user interface, and advanced calibration technology for optimal sound in any room. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio/Video Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 5.1 channel surround sound, Bluetooth connectivity, multiple HDMI inputs, advanced audio processing, and user-friendly interface.

Feature	Description
HDMI Inputs	Multiple inputs for connecting video sources
Bluetooth	Stream audio wirelessly from compatible devices
Dolby TrueHD	High-definition audio format for Blu-ray
DTS-HD Master Audio	Lossless audio format for high-quality sound
Auto Calibration	Optimizes sound based on room acoustics
On-Screen Display	User-friendly interface for easy navigation
Power Output	75 watts per channel for dynamic sound
Zone 2 Control	Ability to control a second audio zone

Installation

Unpack and inspect contents. Place the receiver on a stable surface with adequate ventilation.

Connect speakers: Use appropriate gauge speaker wire for connections.
Connect video sources: Use HDMI cables for video input.
Connect to power: Plug into a grounded AC outlet.
Connect to network: Use Ethernet or Wi-Fi for online features.

WARNING! Ensure all connections are secure to prevent damage.

First-Time Setup

Power on the receiver; follow on-screen prompts to configure settings.

Select input source: Use the INPUT button on the remote.
Set up speakers: Follow the calibration process for optimal sound.
Connect to Wi-Fi: Enter network credentials if using wireless.
Update firmware: Check for updates in the settings menu.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Channels: 5.1
Power Output: 75 watts per channel
HDMI Inputs: 5
Audio Formats: Dolby TrueHD, DTS-HD Master Audio
Bluetooth: Yes
Network Connectivity: Ethernet and Wi-Fi
Dimensions: 17.1 x 13.4 x 5.9 inches
Weight: 18.5 lbs

Controls and Settings

Access settings via the on-screen display or remote control. Key controls include POWER, INPUT, VOLUME, and MENU.

Remote: Features buttons for quick access to settings and inputs.

Audio settings: Adjust bass, treble, and balance through the menu. Video settings: Configure resolution and aspect ratio.

Connecting Devices

Connect devices using HDMI, optical, or analog inputs.

Turn off all devices before connecting.
Match cables to ports (e.g., HDMI to HDMI).
Select input via the INPUT button on the remote.

Tip: Ensure all devices are powered off during connections.

Playing Audio/Video Media

Supports various audio and video formats.

Power on the receiver and connected devices.
Select the desired input source.
Use the remote to control playback functions.
Adjust volume and settings as needed.

WARNING! Avoid excessive volume levels to prevent damage to speakers.

Accessibility Features

Closed captions and audio descriptions can be enabled through the settings menu.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. For support, visit www.denon.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Source/menu	Ensure correct input is selected; check connections.
Device not recognized	Connection issue	Check cable connections and power status.

Reset: Menu > System > Reset if available.

Service: Contact customer support for assistance.