Denon AVR 950 Manual

The Denon AVR 950 is a high-performance audio/video receiver designed to deliver an immersive home theater experience. It supports various audio formats, including Dolby Atmos and DTS:X, providing a rich sound environment. The receiver features multiple HDMI inputs, allowing for easy connectivity with various devices such as Blu-ray players, gaming consoles, and streaming devices. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: HDMI inputs, Dolby Atmos support, DTS:X support, built-in Wi-Fi, Bluetooth connectivity, and multiple audio formats.

Feature	Description
HDMI Inputs	Multiple inputs for connecting various devices
Dolby Atmos	3D audio experience for immersive sound
DTS:X	Advanced audio format for dynamic sound
Wi-Fi & Bluetooth	Wireless streaming capabilities
Zone 2/Zone 3 Outputs	Multi-room audio support
On-Screen Display	User-friendly interface for easy navigation
Remote Control	Convenient control of all functions
Audio Calibration	Automatic calibration for optimal sound

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

1. Connect speakers: Use the appropriate speaker terminals for your setup.
2. Connect video sources: Use HDMI cables for video input.
3. Connect to power: Plug into a suitable AC outlet.
4. Ensure all connections are secure before powering on.

WARNING! Receiver is heavy; lift with care to avoid injury.

First-Time Setup

Power on the receiver; follow on-screen prompts for initial setup.

1. Select input source: Use the INPUT button on the remote.
2. Configure audio settings: Access the setup menu to adjust audio preferences.
3. Set up network: Connect to Wi-Fi or Ethernet for streaming services.
4. Run audio calibration: Use the built-in calibration tool for optimal sound.

CAUTION! Ensure stable surface; use two people for handling if necessary.

Specifications

• Audio Channels: 7.2 channels.
• Power Output: 100 watts per channel.
• Supported Formats: Dolby Atmos, DTS:X, PCM, MP3, FLAC.
• HDMI Inputs: 6 HDMI inputs, 1 HDMI output.
• Networking: Built-in Wi-Fi, Ethernet port.
• Dimensions: 17.1 x 13.3 x 6.6 inches.
• Weight: 22.5 lbs.
• Power Consumption: 500 watts (maximum).

Controls and Settings

Access settings via the on-screen display or the remote control. Key controls include POWER, INPUT, VOLUME, and MENU.

Remote: Includes buttons for quick access to audio settings, input selection, and playback controls.

Audio settings: Adjust bass, treble, balance, and surround sound options through the setup menu.

Connecting Devices

Connect devices using HDMI, optical, or analog inputs. Ensure all devices are powered off before connecting.

1. Match cables to ports (e.g., HDMI to HDMI).
2. Power on the receiver and connected devices.
3. Select the appropriate input on the receiver.

Tip: Keep cables organized to avoid interference.

Playing Audio/Video Media

Supports various audio and video formats for playback.

1. Insert media: Use the appropriate input source for playback.
2. Play: Use the remote control to start playback.
3. Adjust volume: Use the volume control on the remote or receiver.
4. Stop: Press the STOP button to halt playback.

WARNING! Ensure media is compatible with the receiver.

Accessibility Features

Closed Captions: Enable in the audio settings menu. Parental Controls: Block content based on ratings through the settings menu.

Care & Cleaning

Unplug before cleaning. Use a dry cloth to clean the exterior; avoid liquids.

CAUTION! Do not use abrasive cleaners; keep away from moisture.

Regulatory Information

FCC Part 15: Complies with interference limits for residential use. Copyright © 2026 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Antenna/menu	Use auto-program in menu; ensure antenna connected.
Media not playing	Media/loading	Ensure media is loaded properly; check for damage.

Reset: Menu > System > Reset if available.

Service: 1-800-555-0199; www.denon.com