Denon AVR-87 User Manual

The Denon AVR-87 is a high-performance audio/video receiver designed for home theater enthusiasts. It supports various audio formats, including Dolby Atmos and DTS:X, providing an immersive sound experience. The receiver features multiple HDMI inputs, allowing for easy connectivity with various devices such as Blu-ray players, gaming consoles, and streaming devices. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio/Video Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: HDMI inputs, Dolby Atmos support, built-in Bluetooth, and Wi-Fi connectivity.

Feature	Description
HDMI Inputs	Multiple inputs for connecting various devices
Dolby Atmos	Immersive audio experience with overhead sound
DTS:X	Advanced audio format for dynamic sound placement
Bluetooth	Wireless streaming from mobile devices
Wi-Fi Connectivity	Access to streaming services and firmware updates
Multi-Room Audio	Play different audio in multiple rooms
On-Screen Display	User-friendly interface for easy navigation
Remote Control	Convenient control of all functions

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

Connect speakers: Use appropriate speaker wire for connections.
Connect video sources: Use HDMI cables for video devices.
Connect to power: Plug the receiver into a power outlet.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

Select input source: Use the remote to choose the desired input.
Configure audio settings: Access the setup menu to adjust audio preferences.
Set up network: Connect to Wi-Fi for streaming services.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Audio Channels: 7.2 channel surround sound.
Power Output: 100 watts per channel.
Supported Formats: Dolby Atmos, DTS:X, PCM.
HDMI Version: HDMI 2.0 with HDCP 2.2 support.
Network Connectivity: Wi-Fi and Ethernet.
Dimensions: 17.1 x 13.4 x 6.3 inches.
Weight: 22.5 lbs.

Controls and Settings

Access OSD via remote control. Front Panel: POWER, INPUT, VOLUME, MUTE.

Remote: POWER, INPUT, VOLUME, MENU, SETUP.

Audio settings: Adjust bass, treble, and balance. Video settings: Configure resolution and aspect ratio.

Connecting Devices

Connect devices using HDMI, optical, or RCA cables.

Turn off the receiver and devices before connecting.
Match cables to ports (e.g., HDMI to HDMI).
Select input via remote control.

Tip: Ensure all devices are powered off before connecting cables.

Playing Audio/Video Media

Supports various audio and video formats.

Insert media: Load DVD or connect streaming device.
Play: Use remote to start playback.
Pause/Stop: Use remote buttons for control.
Skip: Use PREV/NEXT buttons for tracks.

WARNING! Do not force media into the slot; eject properly.

Accessibility Features

Closed Captions: Enable in settings for accessible viewing.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth only; no liquids or aerosols.

CAUTION! Avoid spraying liquids; keep away from heat and moisture.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Antenna/menu	Use auto-program in menu; ensure antenna connected.
Media not playing	Media/loading	Ensure media is loaded properly; check for damage.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.