Denon AVR 65 Owner's Manual

The Denon AVR 65 is a high-performance audio/video receiver designed to deliver an immersive home theater experience. It supports various audio formats, including Dolby Atmos and DTS:X, and features multiple HDMI inputs for connecting your devices. The AVR 65 also includes advanced room calibration technology to optimize sound quality based on your room's acoustics. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: HDMI inputs, Dolby Atmos support, DTS:X, built-in Wi-Fi, Bluetooth connectivity, and advanced room calibration.

Installation

Unpack and inspect contents. Place the receiver on a stable surface with adequate ventilation.

1. Connect speakers: Use appropriate speaker wire for connections.
2. Connect video sources: Use HDMI cables for video devices.
3. Connect to power: Plug into a grounded AC outlet.
4. Ensure all connections are secure before powering on.

WARNING! Ensure proper ventilation to avoid overheating.

First-Time Setup

Power on the receiver and follow the on-screen prompts to configure settings.

1. Select language: Choose your preferred language from the setup menu.
2. Configure speakers: Use the room calibration feature to optimize sound.
3. Set up network: Connect to Wi-Fi or Ethernet for streaming services.
4. Update firmware: Check for any available updates for optimal performance.

CAUTION! Ensure all connections are correct before powering on.

Specifications

• Audio Channels: 7.2 channels.
• Power Output: 75 watts per channel (8 ohms).
• HDMI Inputs: 6 HDMI inputs, 1 HDMI output.
• Supported Formats: Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio.
• Network Connectivity: Wi-Fi, Ethernet, Bluetooth.
• Dimensions: 17.1 x 13.2 x 6.3 inches.
• Weight: 22.5 lbs.
• Power Consumption: 500 watts (maximum).

Controls and Settings

Access settings via the on-screen display or remote control. Key controls include power, volume, input selection, and menu navigation.

Remote: Power, volume, input selection, and direct access buttons for quick navigation.

Audio settings: Adjust bass, treble, and balance through the menu. Video settings: Configure picture settings for optimal viewing.

Connecting Devices

Connect devices using HDMI, optical, or analog inputs. Ensure all devices are powered off before connecting.

1. Turn off the receiver and all devices before connecting.
2. Match cables to ports (e.g., HDMI to HDMI).
3. Select input via the remote control or front panel.

Tip: Use high-quality cables for the best audio and video performance.

Playing Audio/Video Media

Supports various audio and video formats for playback.

1. Power on the receiver and connected devices.
2. Select the desired input source using the remote.
3. Play media using the connected device's controls.
4. Adjust volume and settings as needed.

WARNING! Do not overload the receiver with excessive power.

Accessibility Features

Closed captions and audio descriptions are available for supported media. Check the settings menu for options.

Care & Cleaning

Unplug the receiver before cleaning. Use a soft, dry cloth; do not use liquids or aerosols.

CAUTION! Avoid using harsh chemicals or abrasive materials.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Reset: Menu > System > Reset if available.

Service: For support, contact Denon customer service.