Denon AVR 488 Service Manual

The Denon AVR 488 is a versatile audio/video receiver designed to deliver high-quality sound and video performance. It supports various audio formats, including Dolby Digital and DTS, and features multiple HDMI inputs for connecting various devices. The receiver also includes advanced audio processing features, customizable settings, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio/Video Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: HDMI inputs, Dolby Digital and DTS support, built-in AM/FM tuner, remote control, customizable audio settings, and multiple speaker outputs.

Feature	Description
HDMI Inputs	For connecting video sources like Blu-ray players and gaming consoles
Audio Formats	Supports Dolby Digital, DTS, and other surround sound formats
AM/FM Tuner	Built-in tuner for radio reception
Speaker Outputs	Multiple outputs for connecting surround sound speakers
Remote Control	Convenient control of the receiver from a distance
Customizable Settings	Adjustable audio settings for personalized sound experience

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

Connect speakers: Use appropriate speaker wire for each channel.
Connect video sources: Use HDMI cables for video input.
Connect to power: Plug into a suitable AC outlet.
Ensure all connections are secure before powering on.

WARNING! Ensure proper ventilation around the receiver to prevent overheating.

First-Time Setup

Power on the receiver and follow the on-screen prompts to configure settings.

Select audio output: Choose between stereo and surround sound.
Program radio stations: Use the tuner to scan and save stations.
Adjust speaker settings: Use the setup menu to configure speaker distances and levels.
For HDMI: Set the HDMI control options as needed.

CAUTION! Ensure all connections are made before powering on the receiver.

Specifications

Audio Channels: 5.1 channel surround sound.
Power Output: 75 watts per channel (8 ohms).
Supported Formats: Dolby Digital, DTS, PCM.
HDMI Inputs: 4 HDMI inputs, 1 HDMI output.
FM Tuner: 87.5 - 108 MHz.
Dimensions: 17.1 x 13.4 x 5.9 inches.
Weight: 20.5 lbs.

Controls and Settings

Access the on-screen display (OSD) via the remote control. Front Panel: POWER, INPUT SELECTOR, VOLUME, TUNING.

Remote: POWER, INPUT, VOLUME, MUTE, TUNING, SETUP.

Audio settings: Adjust bass, treble, and balance. Video settings: Adjust brightness, contrast, and color.

Connecting Devices

Connect devices using HDMI, optical, or RCA cables as needed.

Turn off the receiver and devices before connecting.
Match cables to the appropriate ports.
Select the input source using the remote control.

Tip: Ensure all devices are powered off during connections to avoid damage.

Playing Audio/Video Media

Supports various audio and video formats.

Insert media: Load a disc or connect a streaming device.
Play: Use the remote control to start playback.
Stop: Press STOP to halt playback.
Skip: Use the PREV/NEXT buttons for tracks or chapters.
Adjust volume: Use the VOLUME control on the remote.

WARNING! Do not force discs into the tray; eject properly.

Accessibility Features

Closed Captions: Enable in the audio settings menu. Parental Controls: Block content based on ratings.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Do not use liquids or aerosols; keep away from moisture.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Antenna/menu	Use auto-program in menu; ensure antenna connected.
Disc not playing	Disc/loading	Ensure disc loaded properly; eject and reload; check for damage.

Reset: Menu > System > Reset if available.

Service: 1-800-555-0199; www.denon.com