Denon AVR 3313CI Owners Manual

The Denon AVR 3313CI is a high-performance 9.2 channel AV receiver designed for home theater enthusiasts. It features advanced audio and video processing capabilities, including support for 4K Ultra HD video, multi-zone audio, and various streaming services. The AVR 3313CI is equipped with Audyssey MultEQ XT32 for room acoustic correction, ensuring optimal sound quality in any environment. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 9.2 channel amplification, HDMI inputs, network streaming, Audyssey room correction, multi-zone audio support.

Installation

Unpack and inspect contents. Place the receiver on a stable surface with adequate ventilation.

1. Connect speakers: Use appropriate speaker wire for connections.
2. Connect video sources: Use HDMI cables for video devices.
3. Connect to network: Use Ethernet or Wi-Fi for internet access.
4. Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts to configure settings.

1. Set up speakers: Use the Audyssey setup microphone for calibration.
2. Configure network settings: Connect to Wi-Fi or wired network.
3. Update firmware: Check for updates via the network.
4. Program remote: Follow instructions to set up the remote control.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

• Channels: 9.2 channel amplification.
• Power Output: 125 watts per channel (8 ohms).
• HDMI: 8 inputs, 2 outputs, 4K pass-through.
• Audio Formats: Dolby Atmos, DTS:X, DTS-HD Master Audio.
• Video Formats: Supports HDR10, Dolby Vision.
• Network Connectivity: Built-in Wi-Fi, Ethernet port.
• Weight: 24.3 lbs (11 kg).
• Dimensions: 17.1 x 14.5 x 6.3 inches (W x D x H).

Controls and Settings

Access settings via the on-screen display or the front panel. Key controls include power, volume, input selection, and menu navigation.

Remote: Includes buttons for power, volume, input selection, and direct access to streaming services.

Audio settings: Adjust bass, treble, and balance. Video settings: Configure picture modes and aspect ratios.

Connecting Devices

Connect devices using HDMI, optical, or analog inputs. Ensure proper cable matching for each connection type.

1. Turn off all devices before connecting.
2. Match cables to ports (e.g., HDMI to HDMI).
3. Select input via the remote control or front panel.

Tip: Label cables for easier identification.

Streaming Audio/Video

Access streaming services through the receiver's interface. Ensure the receiver is connected to the internet.

1. Navigate to the streaming section in the menu.
2. Select the desired service and log in if necessary.
3. Browse and select content to play.

WARNING! Ensure stable internet connection for uninterrupted streaming.

Accessibility Features

Closed captions and audio descriptions can be enabled through the settings menu. Ensure your content supports these features.

Care & Cleaning

Unplug the receiver before cleaning. Use a dry cloth to wipe the exterior; avoid using liquids or aerosols.

CAUTION! Do not expose the receiver to moisture or extreme temperatures.

Regulatory Information

This device complies with FCC Part 15 rules. For more information, visit the Denon website or contact customer support.

Troubleshooting

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.