Denon AVR 1911 Manual PDF

The Denon AVR 1911 is a high-performance 7.1 channel AV receiver that supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio. It features advanced video processing capabilities, including upscaling to 1080p, and is equipped with multiple HDMI inputs for connecting various devices. The receiver also includes networking capabilities, allowing for streaming music from various online services and local network sources. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio/Video Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel audio, multiple HDMI inputs, networking capabilities, advanced audio processing.

Feature	Description
HDMI Inputs	Multiple inputs for connecting various devices
Audio Formats	Supports Dolby TrueHD, DTS-HD Master Audio
Video Processing	Upscaling to 1080p for enhanced video quality
Networking	Stream music from online services and local network
Remote Control	Full control of receiver functions

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

Connect speakers: Use appropriate speaker wire for connections.
Connect video sources: Use HDMI cables for video input.
Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

Set up speakers: Use the setup wizard to configure speaker settings.
Connect to network: Follow prompts to connect to Wi-Fi or Ethernet.
Update firmware: Check for updates in the settings menu.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

Channels: 7.1 channel audio.
Power Output: 100 watts per channel.
HDMI Inputs: 6 HDMI inputs.
Audio Formats: Supports Dolby TrueHD, DTS-HD Master Audio.
Video Processing: Upscaling to 1080p.
Networking: Ethernet and Wi-Fi connectivity.
Dimensions: 17.1 x 13.2 x 6.3 inches.
Weight: 23.1 lbs.

Controls and Settings

Access OSD via remote control or front panel buttons. Key controls include power, volume, input selection, and menu navigation.

Remote: POWER, INPUT, VOLUME, MENU, and numeric buttons.

Connecting Devices

Connect devices using HDMI, optical, or analog connections.

Turn off the receiver and devices before connecting.
Match cables to ports (e.g., HDMI to HDMI).
Select input via remote control.

Tip: Ensure all devices are powered off before connecting cables.

Playing Audio/Video Media

Supports various audio and video formats.

Insert media: Use appropriate input for playback.
Play: Use remote control to start playback.
Stop: Press STOP to halt playback.
Skip: Use PREV/NEXT for tracks or chapters.

WARNING! Do not force media into the receiver; eject properly.

Accessibility Features

Closed Captions: Enable in settings for supported media.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Connections/menu	Check connections; use auto-program in menu.
Media not playing	Media/loading	Ensure media is loaded properly; check for damage.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.