Denon AVR 1910 Service Manual

The Denon AVR 1910 is a high-performance 7.1 channel AV receiver designed for home theater enthusiasts. It supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, and features advanced video processing capabilities. The receiver offers multiple HDMI inputs, allowing for seamless connectivity with various devices, and includes built-in networking features for streaming music and accessing online content. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 7.1 channel audio output, multiple HDMI inputs, built-in Wi-Fi, Ethernet connectivity, and advanced audio processing.

Installation

Unpack and inspect contents. Place the receiver on a stable surface.

1. Connect speakers: Use appropriate speaker wire for connections.
2. Connect video sources: Use HDMI or component video cables.
3. Connect to network: Use Ethernet or Wi-Fi for internet access.
4. Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

1. Set up speakers: Use the auto setup feature for calibration.
2. Connect to network: Select Wi-Fi or Ethernet in settings.
3. Update firmware: Check for updates in the system menu.
4. Configure audio settings: Adjust according to your preferences.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

• Channels: 7.1 channel audio output.
• Power Output: 90 watts per channel (8 ohms).
• HDMI Inputs: 6 HDMI inputs, 1 HDMI output.
• Audio Formats: Supports Dolby TrueHD, DTS-HD Master Audio.
• Network Connectivity: Built-in Wi-Fi and Ethernet.
• Dimensions: 17.1 x 13.4 x 6.3 inches.
• Weight: 22.5 lbs.
• Power Consumption: 500 watts (maximum).

Controls and Settings

Access OSD via remote control or front panel buttons. Key controls include POWER, INPUT SELECTOR, VOLUME, and MENU.

Remote: Includes buttons for direct access to inputs, volume control, and setup menus.

Audio settings: Adjust bass, treble, and balance. Video settings: Adjust brightness, contrast, and aspect ratio.

Connecting Devices

Connect devices using HDMI for best quality. Use optical or coaxial for audio sources.

1. Turn off the receiver and devices before connecting.
2. Match cables to ports (e.g., HDMI to HDMI).
3. Select input via remote control for playback.

Tip: Ensure all devices are powered off before making connections.

Playing Audio/Video Media

Supports various audio and video formats.

1. Insert media: Use the appropriate input for playback.
2. Play: Use the remote to select and play media.
3. Stop: Press STOP to halt playback.
4. Skip: Use PREV/NEXT for tracks or chapters.
5. Adjust volume: Use the volume control on the remote.

WARNING! Do not force connections; handle media with care.

Accessibility Features

Closed Captions: Enable in settings for supported media. Audio descriptions available for select content.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth; avoid liquids.

CAUTION! Do not use abrasive cleaners; keep away from moisture.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. For support, visit www.denon.com or contact customer service.

Troubleshooting

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.