Denon AVR 1912 Manual

The Denon AVR 1912 is a versatile 7.1 channel AV receiver that supports a wide range of audio and video formats. It features advanced audio processing, including Dolby TrueHD and DTS-HD Master Audio, as well as support for 3D video and 4K upscaling. The receiver is equipped with multiple HDMI inputs, network connectivity, and a user-friendly interface for easy setup and operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 7.1 channel audio, HDMI inputs, network streaming, advanced audio processing.

Feature	Description
HDMI Inputs	Multiple inputs for connecting various devices
Network Connectivity	Access streaming services and firmware updates
Audio Processing	Supports Dolby TrueHD and DTS-HD Master Audio
3D Video Support	Compatible with 3D video formats
4K Upscaling	Upscales standard video to 4K resolution
On-Screen Display	User-friendly interface for easy navigation
Remote Control	Convenient control of all functions
Multi-Room Audio	Supports audio playback in multiple rooms

Installation

Unpack and inspect contents. Place on stable surface.

1. Connect speakers: Use appropriate speaker wire for connections.
2. Connect video sources: Use HDMI cables for video devices.
3. Connect to network: Use Ethernet or Wi-Fi for internet access.
4. Plug into AC power.

WARNING! Receiver is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on receiver; follow on-screen prompts.

1. Program speakers: Use the setup wizard to configure speaker settings.
2. Set audio preferences: In the audio menu, adjust settings as needed.
3. Configure video settings: Set resolution and aspect ratio for display.
4. For network: Connect to Wi-Fi or Ethernet and test connection.

CAUTION! Ensure stable surface; use two people for handling.

Specifications

• Channels: 7.1 channel audio.
• Power Output: 100 watts per channel.
• HDMI Inputs: 6 HDMI inputs.
• Audio Formats: Supports Dolby TrueHD, DTS-HD Master Audio.
• Video Formats: 3D video, 4K upscaling.
• Network: Ethernet and Wi-Fi connectivity.
• Dimensions: 17.1 x 13.2 x 6.3 inches.
• Weight: 20.5 lbs.

Controls and Settings

Access OSD via remote control or front panel buttons. Key controls include POWER, INPUT, VOLUME, and MENU.

Remote: POWER, INPUT, VOLUME, MUTE, SETUP, and navigation buttons.

Audio settings: Adjust bass, treble, and balance. Video settings: Configure resolution and aspect ratio.

Connecting Devices

Connect devices using HDMI, optical, or RCA cables.

1. Turn off receiver and devices before connecting.
2. Match cables to ports (e.g., HDMI to HDMI).
3. Select input via remote control for the desired device.

Tip: Ensure receiver is off and unplugged before connecting cables.

Playing Media

Supports various media formats including audio and video.

1. Select input: Use remote to choose the connected device.
2. Play: Use the play button on the remote or device.
3. Stop: Press STOP on the remote to halt playback.
4. Skip: Use PREV/NEXT buttons for tracks or chapters.
5. Adjust volume: Use VOLUME buttons on the remote.

WARNING! Do not force connections; ensure proper insertion.

Accessibility Features

Closed Captions: Enable in audio settings. Parental Controls: Block content by ratings in the settings menu.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; avoid liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Source/menu	Check source settings and connections.
Device not recognized	Connection issue	Check cable connections and restart the receiver.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.