Denon 4802 Manual

The Denon 4802 is a high-performance audio/video receiver that supports various surround sound formats, including Dolby Digital and DTS. It features multiple inputs for connecting various devices, advanced audio processing capabilities, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Multiple HDMI inputs, built-in Dolby Digital and DTS decoders, AM/FM tuner, remote control, and customizable audio settings.

Feature	Description
HDMI Inputs	For connecting high-definition video sources
Dolby Digital Decoder	For surround sound processing
DTS Decoder	For high-quality audio playback
AM/FM Tuner	For radio reception
Remote Control	For convenient operation
Customizable Audio Settings	For tailored sound experience

Installation

Unpack and inspect contents. Place on a stable surface.

1. Connect audio/video sources: Use HDMI or RCA cables for connections.
2. Connect speakers: Ensure proper polarity and connections.
3. Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

1. Program channels automatically: Use the setup menu to scan for available stations.
2. Set audio preferences: Adjust settings for optimal sound quality.
3. For video: Select the appropriate input source for your display.

CAUTION! Ensure stable surface; handle with care.

Specifications

• Audio Channels: 7.1 channel surround sound.
• Power Output: 100 watts per channel.
• Supported Formats: Dolby Digital, DTS, PCM.
• Inputs: 5 HDMI, 2 optical, 2 coaxial, 4 RCA.
• Weight: 25 lbs.
• Dimensions: 17.1 x 15.5 x 6.3 inches.
• Power Source: 120V AC, 60Hz.

Controls and Settings

Access settings via the on-screen display (OSD). Front Panel: POWER, INPUT SELECTOR, VOLUME.

Remote: POWER, INPUT, VOLUME, MUTE, MENU, SETUP.

Audio: Adjust bass, treble, balance, and surround settings. Video: Configure display settings for optimal viewing.

Connecting Devices

Connect audio/video sources using HDMI or RCA cables.

1. Turn off the receiver and devices before connecting.
2. Match cables to ports (e.g., HDMI to HDMI).
3. Select input via the remote control.

Tip: Ensure all devices are powered off during connections.

Playing Audio/Video Media

Supports various audio and video formats.

1. Insert media: Load DVD or connect streaming device.
2. Play: Use the remote to select play options.
3. Stop: Press STOP to halt playback.
4. Skip: Use PREV/NEXT for tracks or chapters.

WARNING! Do not force media; handle with care.

Accessibility Features

Closed captions: Enable in the setup menu. Audio descriptions available for select media.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Avoid spraying liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust video settings in the menu.
Channels not programming	Antenna/menu	Use auto-program in the menu; ensure antenna connected.
Media not playing	Media/loading	Ensure media is loaded properly; check for damage.

Reset: Menu > System > Reset if available.

Service: 1-800-XYZ-1234; www.denon.com