Denon 2802 Manual PDF

The Denon 2802 is a high-performance audio/video receiver that supports various surround sound formats, including Dolby Digital and DTS. It features multiple inputs for connecting various devices, advanced audio processing capabilities, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Multiple audio/video inputs, Remote Control, HDMI inputs, Optical and Coaxial digital inputs, and advanced audio processing.

Feature	Description
HDMI Inputs	For connecting high-definition video sources
Optical Digital Input	For digital audio connection from devices
Coaxial Digital Input	For additional digital audio connection
Multi-channel Audio Processing	Supports various surround sound formats
Remote Control	For convenient operation from a distance
Speaker Outputs	Connects to multiple speakers for surround sound
Setup Menu	User-friendly interface for configuration

Installation

Unpack and inspect contents. Place on stable surface.

1. Connect speakers: Use appropriate speaker wire for connections.
2. Connect video sources: Use HDMI or other inputs for video devices.
3. Plug into AC power.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the receiver; follow on-screen prompts.

1. Program inputs: Use the setup menu to configure connected devices.
2. Set audio preferences: Adjust settings for optimal sound quality.
3. Test speakers: Use the built-in test tone feature to check connections.

CAUTION! Ensure stable surface; avoid overheating.

Specifications

• Power Output: 100 watts per channel.
• Audio Formats: Supports Dolby Digital, DTS, and more.
• Inputs: Multiple HDMI, Optical, Coaxial, and RCA inputs.
• Outputs: Speaker outputs for 5.1 surround sound.
• Dimensions: 17.1 x 14.5 x 6.3 inches.
• Weight: 22.5 lbs.
• Power Consumption: 450 watts maximum.

Controls and Settings

Access OSD via remote control or front panel buttons. Key controls include POWER, INPUT SELECTOR, VOLUME, and MENU.

Remote: POWER, INPUT, VOLUME, MUTE, and SETUP.

Audio settings include bass, treble, balance, and surround modes.

Connecting Devices

Connect devices using HDMI, Optical, or Coaxial inputs.

1. Turn off the receiver and devices before connecting.
2. Match cables to ports (e.g., HDMI to HDMI).
3. Select input via remote control.

Tip: Ensure all devices are powered off during connections.

Playing Audio Media

Supports various audio formats including MP3, WAV, and more.

1. Insert media: Load CD or connect streaming device.
2. Play: Use remote control to select and play media.
3. Adjust volume: Use volume control on the remote or receiver.

WARNING! Do not force media into the slot; handle with care.

Accessibility Features

Closed Captions: Enable in settings for compatible media.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 Denon; trademarks of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Obstacles/batteries	Remove obstacles; point at IR sensor; install fresh batteries.
No sound	Connections/mute	Ensure receiver is on; check connections; adjust mute.
Picture not clear	Settings	Adjust settings in the menu.
Channels not programming	Input selection/menu	Use setup menu to configure inputs.
Media not playing	Media/loading	Ensure media is loaded properly; check for damage.

Reset: Menu > System > Reset if available.

Service: Contact Denon support for assistance.